Did you know that over two million men and women worldwide suffer from workplace accidents and injuries every single year? Many of these injuries occur at construction sites, which can be very dangerous if not inspected and run properly.
Are you doing a final inspection on a construction site and you don’t know where to begin?
Here are some things to look out for, whether you’re an independent inspector or you work with a construction company.
1. Ensure Everything Is Within Contract
Before you do the inspection, make sure you read the contract thoroughly. The construction contract should include things like the proper contact information, the type of project, and the completion date.
Verify every material of the contract in your final inspection. You may have to work with the people who run the construction site to go through it point by point.
2. Compliance With Authorities
Depending on the location of your construction site, you should always ensure that it complies with guidelines from authorities. For example, if you live in the United States, the primary federal authority is OSHA.
You also need to check for code violations. Some of these are working without a permit and improper accommodations for people with disabilities.
3. Verify the Building is Move-In Ready
One of the biggest aspects of your final inspection is assessing whether people can move into the new structure right away. You should ensure that elements like plumbing are working and that waste material has a proper place to go.
No matter what type of construction project you’re inspecting, you need to ensure that it is clean and ready for move-in. A cleaning company like hebystad.se/stadfirma-vasteras/ can help you to make sure the new project is sparkling clean.
4. Check Electrical Wiring
Electrical hazards can potentially be a huge issue at any construction site. If the site follows an environmental plan, such as solar energy panels, you may need to take a look at those as well.
Construction workers need to follow proper protocol when working with electrical wiring. All tools should be safely put away when not in use.
5. Potential Site Hazards
Workplace injuries are incredibly common, and some of the biggest ones to avoid are scaffolding issues and falls from elevated surfaces. Both of these involve ladders and the potential for serious problems.
As an independent inspector, evaluate and take note of all areas that could potentially cause injuries. Make sure workers have proper accommodations to lessen risk.
Perform the Best Final Inspection
If you perform a final inspection of a construction site, you should not have to worry about whether it is up to the standards it needs to be. With this guide, you can know exactly what to look for, from your construction contract to code violations.
Would you like to learn more about how to keep your workplace safe and running smoothly? Check out our site for all of the information you will need.