A car is generally known to be the most prized possession. There are many chances are that there are hundreds of unanswered questions that are running around in your mind when you ask a vehicle owner about sending his car for maintenance and repairs or for a coat of repainting with spray painting Sydney.
Some people are afraid of not doing it correctly as most of them avoid painting their car by themselves. You might end up damaging the look of your car and would require the services of a professional to get it right as the fear is completely justified here.
You will also have greater control over the vehicle’s design as you would be saving a considerable amount of money and learning how to paint the car properly.
Selecting the Location
You need to park the car in a good ventilated area that would make drying a lot easier before you start and to cover the car portions that will not be painted like the windows, lights, and mirrors with the use of duct tape and plastic sheets. These parts can also remove through this. With the medium grit sandpaper, rub the entire surface of the vehicle. It would help if you ensure that the body is even and you do not miss a spot. To remove any foreign particles, you need to wipe them with a dry towel.
You have to apply a layer of primer onto the surface of the car. To make sure that the primer is spreading thinly and evenly, you need to use a brush. It should not be more than three hours as you need to leave it to dry as long as it takes. You need to rub the surface of the car with the use of fine-grit sandpaper. Ensure that the body is entirely even as you need to do the sanding in a back and forth motion. With a dry towel, you can now remove all kinds of dirt and sand particles.
Using Spray Painting Sydney Can
It would help if you remembered to shake it properly before you can use the can of spray paint. By spraying the paint over some old newspapers before using it on your car, make sure that they can work well here. Spray the paint onto the car from a distance recommended by the paint manufacturer after checking it. The paint will be a light shade during the first coat. Leave the coat as it is as you need not overspray it. Later on, the paint will be even out. You need to leave it to be dry for an hour or two after applying the first coat.
You are free to remove all protective tapes and the sheets after the spray painting Sydney process is completed. It can add some extra shine to your vehicle as you wipe off the newly painted surface with a microfiber cloth that is dipped in polish. While wearing all the required protective gear, you need to remember to paint your vehicle in a well-ventilated environment.