Make A Bathroom Countertop Out of Concrete
If your bathroom countertops are outdated and boring or you simply want something different, a unique look that would add value to the room, you might consider making a countertop out of cement. Having a brand new concrete countertop made and installed would be expensive but with the right know how, you can achieve the same professional look yourself. Concrete countertops and floors are actually very popular and while they are the perfect way to enhance a contemporary style home, this material can be colored to work in virtually any home.
concrete countertop Once the new concrete countertop in your bathroom is complete, you will have a beautiful new surface, as well as a countertop that is strong, durable, and long-lasting. Because this material is nonporous, clean up and maintenance is extremely easy. You would start by measuring the length and width of the countertop space and then using a product called melamine, which is a type of particle board create a mold in which the concrete would be poured. With melamine designed with a plastic coating, once the countertop has been made it would be easy to remove from the form without being damaged.
For the sink, use a piece of Styrofoam that has been cut the same size and shape as the actual sink. This would then be attached to the melamine mold as a placeholder. However, you need to make sure a tight seal is created so as the concrete is poured into the mold it does not drip out. For this, caulk around the bottom side seams and then screw this foam mold into place. Next, a piece of wire mesh in place, which would be placed inside the sink form to help reinforce it as the concrete is poured into the form. BRAVECTO COUPONS FOR CATS MEDICINE
At this point, you are ready to start making the countertop, with quick-drying concrete being the best choice. If you mix the concrete in a wheelbarrow, when ready to pour in the mold you could easily wheel it over to the location in the yard where the countertop was being made. Follow the manufacturer’s instructions for making the concrete but we suggest the water be added slowly to guarantee the right consistency. After being mixed and with the form secure, you would use a shovel to start adding the concrete. To create a level surface and eliminate bubbles, use a wood float to pat the concrete down several times after pouring.
During the next step, you would have the opportunity to add color or colors, as well as create texture for the concrete countertop surface. Using the same concrete for making the base layer, a layer of concrete would be added for the surface layer. Now, different elements could be added such as mineral pigments for specks of color or a product to create full color. Other great ideas include adding marble sand or for a different look, make the surface layer out of quick drying white Portland cement instead of the concrete used on the bottom. To create texture, you could drag a notched trowel over the surface or any other object to create the look wanted.
The edges of the concrete countertop would be finished and for this, use some of the top layer concrete, adding a little water to thin it out so smooth edges would be easier to create. Then, you would need to float the slag into the surface and with a hammer, gently strike the edges of the form. With each soft blow, bubbles around the edges would be forced out. To bring the cream to the top, a jitterbug should be used, also producing the smooth edges.
If you prefer a smooth surface for your new concrete bathroom countertops, make sure the material is ready. Simply press your finger down on an inconspicuous area to test for dryness. If you see an indentation, you know the concrete is too wet but if all you see is a fingerprint, you can start smoothing the entire surface with a trowel. Over the course of hours as the concrete dries, you would need to smooth the surface several times. When ready, the mold for the sink would be removed and the concrete taken out of the mold so the new countertop could be installed. Make A Bathroom Countertop Out of Concrete
The edges of the concrete countertop would be finished and for this, use some of the top layer concrete, adding a little water to thin it out so smooth edges would be easier to create. Then, you would need to float the slag into the surface and with a hammer, gently strike the edges of the form. With each soft blow, bubbles around the edges would be forced out. To bring the cream to the top, a jitterbug should be used, also producing the smooth edges
Read more: BRAVECTO COUPONS FOR CATS MEDICINE
