When it comes to giving your floors a touch of luxury, marble floors are the best choice. It is bright, natural, and has the ability to enhance the looks of a home. Its unique and natural pattern design can instantly enhance the classic curb appeal of your home.
Plus, it is also amazing if you want to stay on a budget while adding elegance and richness to your house. You can install marble flooring almost anywhere in the house, from the living room to the countertops and kitchen floors.
While this is the best flooring option, yet, it gets dirty due to its porous nature. Still, there are many solutions for this problem, and that is Polish.
With the help of the Best Marble Floor Polishing, you can remove all kinds of stains, dirt, marks, and scratches. This article has put together the 7 easiest ways to polish your marble floors.
It Starts With Simple Cleaning
Marble has pores. This is why it is so susceptible to staining. Old stains cannot be removed by polishing. Start by cleaning the floor. First, clean your marble floors with a dry mop. Then, with a mixture of water and mild detergent, gently clean the area.
This will clean it thoroughly but will not be abrasive to the stone. Once you are done, wipe the floor again with a dry cloth.
5 Ways to Polish Your Image Editing Skills in Android
Remove The Stains With Stain Remover
If you notice a stain on your marble floor, it is essential to take care of it immediately and before proceeding with the marble polishing. There are commercial marble stain removers often referred to as treatments that you can also do yourself by slowly mixing these elements:
- One tablespoon of ammonia
- Sodium bicarbonate
- The water
- Small bowl
- hydrogen peroxide
Mix one spoon of ammonia to a half glass of hydrogen peroxide and gradually add just enough baking soda to get a thick paste. Apply the mixture to the stained area of the marble and cover it with a plastic sheet.
Soft Polishing
Once you are done removing stains before polishing, make sure you have a clean, dry surface as marble is porous and smooth and scratches easily, and you don’t want to damage it while polishing. Always use a clean, dry microfiber cloth to gently remove dirt, dust, and sand.
If necessary, rinse thoroughly with a clean, damp microfiber cloth, then dry the surface thoroughly with a clean cloth. If you are not sure about this polishing method you can also hire top marble polishing company and of course, you will get the best quality marble polishing by hiring professionals.
Home Polishing Of Marble Floors
Polished marble is most often used for kitchen countertops, but it is also used for flooring. A homemade marble floor polisher can be used to restore shine to your polished marble floor.
Things you will need:
- Microfiber clothing
- White chalk powder (calcium carbonate)
- Hot water
- Small container
- Soft sponge
To successfully clean marble countertops, pour powdered chalk (calcium carbonate) into the bowl. Moisten the sponge with water then apply it to the chalk. Rub the sponge over the marble in sections in circular motions. Apply chalk (calcium carbonate) to the sponge as you go.
Recheck each area to rinse off the residue with a damp microfiber cloth.
Natural Marble
Removing any existing stains:
Marble is very porous; Staining occurs when liquid seeps into the stone and becomes trapped. Common spills like juices, wine, sauces, cooking oils, and coffee will stain the marble surface.
To remove fresh stains, use a damp microfiber cloth with warm water and a neutral detergent, gently rubbing the stain until the area is clean. Then rinse well.
Removing Stubborn Stains:
Dampen the marble with water and then apply a few drops of a cleaning chemical, we recommend using Sancitro. Scrub gently with a stiff bristle brush and lift well, sometimes stubborn stains may require two or three applications.
Polishing:
After stain removal is complete, make sure you have a clean, dry surface before polishing as marble is smooth and scratches easily, and you don’t want to damage it during polishing.
Always use a clean, dry microfiber cloth to gently remove any dirt, dust, and grit. If necessary, rinse well with a clean, damp microfiber cloth and then dry the surface thoroughly with a clean cloth.
Eco Polishing of your Marble:
Use a mixture of baking soda and water as a rinse aid. Combine (45 g) of baking soda with (0.9 L) of water and mix well. Then, using a clean cloth, apply the mixture to its surface in a thin layer. Let dry for about 5 hours.
After which, using a microfiber cloth and warm water to rinse the marble surface, you are now ready to dry polish the marble with a clean microfiber or chamois cloth, gently wipe the marble in wide circular motions. Move in progressively smaller circles as the surface dries.
For Future Protection:
Tape the areas around the marble surface that will not seal: wood, chrome, or stainless steel trim. Use masking tape or plumber’s tape.
Tape the areas around the marble surface that will not seal: wood, chrome, or stainless steel trim. Use masking tape or plumber’s tape.
When burnishing you do not have to allow the marble to cure for 6-8 hours, during this time do not use the surface as it is easily damaged if not burnished.
Lipicur should be reapplied every 1-2 years, depending on the amount of traffic the marble surface receives.
Apply three coats of Lapicur or Sealer N with a dry clean flat microfiber mop, one coat at a time, allowing to dry between coats. For best results, use a polish between coats to extend the life of the sealer and obtain a better high-gloss finish with ultra-slip properties.
Polishing Your Marble With Baking Soda And Hydrogen Peroxide
Sodium Bicarbonate:
Use a mixture of baking soda and water as a rinse aid. Mix forty grams of baking soda with 1.0 L of water and mix well. Use a clean soft cloth, apply the mixture to the marble surface. Leave to dry for about 5 hours.
After which, using a microfiber cloth and lukewarm water to rinse the surface of the marble, you are now ready to dry polish the marble with a clean microfiber or chamois cloth, gently wipe the marble by large circular movements. Move your hand in smaller circles as the surface dry.
Polishing With Hydrogen Peroxide:
Hydrogen peroxide is great for removing stubborn stains from light-colored marble. Keep in mind that it can act like bleach and discolor dark marble, so always test an inconspicuous area first.
Hydrogen peroxide works best on organic, and water-based pigments. You can use a strong solution and leave it on the stain overnight before washing the marble.
Polish The Marble With A Mixture Of Cornstarch
The power of cornstarch lies in its ability to absorb liquids. If spilled on hard-to-remove marble, such as oil or coffee, cover with cornstarch and let sit overnight. The starch will pull the liquid out of the marble floor and absorb it, so you can wash it off the next morning.
Conclusion:
By using the proper polishing materials, you can remove discoloration and scratches from marble surfaces resulting from dust and stains. Utilizing the easy ingredients to make a polishing mixture can save you both time and money and give your marble floors a refreshing look.
