Ultimate Guide to Repair a Water Damaged Laptop

Some of you enjoy coffee, while others prefer tea or a cold beverage. However, keep in mind that all of these are potentially harmful to your laptop.

Seeing the coffee, water, or another beverage spread over the laptop is usually overwhelming and frustrating. All of these troublesome events appear to be a quick death for the laptop.

However, in rare circumstances, reviving the laptop may be impossible; in some instances, several laptop repair tips and tactics may be useful. You can save your valuable images, files, and folders from permanent destruction if you follow these vital guidelines on time.

So, let’s look at some of the best tactics and approaches you may use to avoid disaster if you accidentally spill water on your laptop.

Table of Contents

Steps to Follow for Fixing Water Damaged Laptop

Additional Tips to Prevent Laptop Damage

Steps to Follow for Fixing Water Damaged Laptop

Flip the Switch Immediately

Many people make the mistake of not shutting off their laptops and continuing to use them when liquid is splashed on them.

The issue is that the harm takes a bit of time to disclose fully.

The laptop may continue to function normally for some time, leading you to believe that no damage has occurred.

However, water spills may take time to show the damage and worsen the problem once you believe no harm has occurred.

Simply turn off the laptop or unplug the cord following removing the battery.

Also, make sure you don’t use the laptop until you’ve completed the necessary repair steps.

Not only will you be able to enhance the odds of your laptop and data being recovered, but you will be able to prevent any electric shock or harm.

Disconnect the Detachable Components

Now comes the hard part of completing the repair procedure, which requires you to remain stiff and steady.

Begin by removing the laptop screws that keep all of the components together.

The hard drive is the first component to be removed from the laptop to avoid data loss or deletion.

It’s also worth noting that if you know a little bit about computers and how to put them together, you must record the disassembling video so that the correct steps can be followed while reassembling the components.

Every laptop’s hard drive is positioned in different places, so be careful when removing the screws and hard drive.

Take out the HDD with caution, delicately blot the component with a cloth for removing noticeable wetness.

Swiping the cloth can damage the hard drive, thus dabbing it means absorbing any wetness and moisture from it.

When you’re finished, use a tiny fan to dampen and dry any lingering moisture that isn’t visible.

Ultimately, use the same trick for other parts of the laptop including the motherboard. Again, installing and uninstalling the motherboard might be tedious, so use caution.

Additionally, many laptops have the option to remove the screen; if yours does, remove it carefully and dry it before reassembling the device.

Apart from that, if your hard drive has crashed or you are unable to recover data, you can contact experts of data recovery in Singapore.

Carefully Dry the Elements Removed

A wet battery can be a ticking time bomb, doing more damage to the laptop and the user.

After you’ve removed the battery and other necessary components, dry them the same way you did the hard drive.

Use the cloth, dryer, or a small fan to get rid of all the moisture that isn’t noticeable easily.

If at all possible, leave the elements to dry overnight for a higher chance of repair.

Additionally, the calcium deposit on these wet materials is something to consider. While you can neglect this, removing it before reassembling the device will be useful in the long run.

Turn the Laptop Upside Down to Dry Keyboard and Other Components

Because the keyboard and laptop screen is not in the same place, the laptop must be turned upside down to dry overnight.

Aside from the HDD and motherboard, it’s also important to completely dry the keyboard and laptop screen.

Place a dry cloth beneath the laptop so that dripping water can be absorbed. If there is any dirt or water left, it will be dropped this way.

Place the laptop in a safe and dry location, as exposing it to the weather might cause it to be damaged in unintended ways.

Also, don’t leave the laptop upside down for too long; a dry, warm room will suffice to dry the device and components overnight or for 24 hours.

Assemble and Try Laptop Functioning

Following all of these ways and techniques, it’s time to reassemble the gadget and verify that it’s working properly.

This time, you’ll be more relaxed because you’ll have all of the images and video recordings of how you disassembled the laptop and how you can reassemble it now.

It’s time to restore the battery and turn on the power cord once you’ve completed the reassembling process.

If all went according to plan, the laptop should be able to function normally again; if not, you’ll need to seek laptop or expert pc repair support.

Also Read: Complete Guide to Solving the Sound Issue in Windows PC

Additional Tips to Prevent Laptop Damage

Utilize Laptop Bags

Laptop bags are designed to protect laptops from liquid spills and accidental falls.

Hence, get the ones that have in-built small storage spaces to keep the drives, external storage devices, and so on. Also, make sure the laptop is waterproof.

Keep the Beverages Away From Laptop While Working

Avoiding liquids such as coffee, tea, and cold drinks when using the laptop is the key to keeping it free of problems.

If you still do, be careful while consuming the eatables or beverages to avoid any harm.

Regular Cleanliness and Maintenance

Use a soft cloth to gently clean the laptop screen and surface and get rid of all dust and dirt particles.

Also, protect the laptop vents, as the dust collecting over here can cause major damage to the laptop in the long run.

Laptop Exterior Covers

These exterior coverings not only protect the laptop gadgets from damage but also improve their appearance. Additionally, these help in keeping the laptops safe from water damage, dust, scratches, and so on.

Seek Professional Help for Repairing Water Damaged Laptop

All these steps and tactics may take several days for executing the laptop repair guide. Although this may be uncomfortable for certain people who have a lower chance of having their laptop fixed, drying the components is still a necessary step to take.

Furthermore, these measures may or may not work for certain people, but they may be beneficial in the long term because laptop use isn’t going away.

The laptop must be repaired because it contains all of the sensitive information, important images, and other data. So, if you don’t have enough time to complete all of these processes and wait for the laptop to work, you can contact experts of apple repair in Singapore.

They can either repair your water-damaged laptop or provide you with additional options such as component replacement and more. However, you can look for laptop replacement options if recovery is no solution.

So, follow this guide whenever you are stuck with a water-damaged laptop and do let us know if these tips worked for you.

Thanks for reading!!

Exit mobile version